Installation process of spoiler Audi TT
To install the spoiler, you must remove the trunk panel. To do this, first remove the lock panel, then take out 2 clips and then remove the trunk panel (it is held on by clips).
After that, using a template, transfer the holes and drill Ф6mm.
Having previously glued double-sided tape to the parts, install them. To make tightening the bolts easier, we recommend removing the rubber band and tightening it through the hole.
Fasten the spoiler mounts, having previously lubricated the threads with detachable thread sealant.
Assemble in reverse order.
Products
Photo gallery
9
photo —
